LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2020 >> LC 500 >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Brake System (Hydraulic) - Service Information (Coupe) >> Brake Pedal >> Removal [04/2020 - 05/2023] >> Procedure

Removal [04/2020 - 05/2023]: Procedure

  1. REMOVE STEERING ACTUATOR ASSEMBLY (w/ VGRS) 

    Refer to REMOVAL [03/2017 - 05/2023]

  2. REMOVE NO. 2 STEERING INTERMEDIATE SHAFT ASSEMBLY (w/o VGRS) 

    Refer to REMOVAL [09/2018 - 05/2023]

  3. REMOVE INSTRUMENT PANEL REINFORCEMENT ASSEMBLY 

    Refer to REMOVAL [04/2020 - 05/2023]

  4. REMOVE BRAKE PEDAL STROKE SENSOR ASSEMBLY 

    Refer to PROCEDURE - Step 3

  5. REMOVE BRAKE PEDAL RETURN SPRING 
    1. Remove the brake pedal return spring from the brake pedal support assembly.
      GTY789165Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  6. REMOVE STOP LIGHT SWITCH ASSEMBLY 

    Refer to PROCEDURE - Step 6

  7. REMOVE STOP LIGHT SWITCH MOUNTING ADJUSTER 

    Refer to PROCEDURE - Step 7

  8. REMOVE PUSH ROD PIN 
    1. Remove the clip and push rod pin.
      GTY958287Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  9. REMOVE BRAKE PEDAL SUPPORT ASSEMBLY 
    1. Detach the 2 wire harness clamps from the brake pedal support assembly.
      GTY789167Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the 2 clips from the brake pedal support assembly.
      GTY830351Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. Remove the 4 nuts and brake pedal support assembly.
  10. REMOVE BRAKE PEDAL PAD 
    1. Remove the brake pedal pad from the brake pedal support assembly.
      GTY958007Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals