LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2020 >> LC 500 >> Repair and Diagnosis >> Body & Frame >> Seats >> Seats - Service Information (Coupe) (2 Of 2) >> Seat Memory Switch >> Installation [03/2017 - ] >> Procedure

Installation [03/2017 - ]: Procedure

  1. INSTALL SEAT MEMORY SWITCH 
    1. Set the bracket on the front door trim board sub-assembly LH.
      GTY779588Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Install in this Direction
    2. Attach the claws and install the seat memory switch.
      GTY824565Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. Install the 2 screws.
      GTY838551Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Screw
      Connector
    4. Connect the connector.
  2. INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY LH 

    Refer to PROCEDURE - Step 39 [03/2017 - 06/2019] , or refer to PROCEDURE - Step 39 [06/2019 - 04/2020] , or refer to PROCEDURE - Step 39 [04/2020 - 05/2023] , or refer to PROCEDURE - Step 39 [05/2023 - ]

  3. INSTALL FRONT DOOR TRIM COVER SUB-ASSEMBLY LH 

    Refer to PROCEDURE - Step 41 [03/2017 - 06/2019] , or refer to PROCEDURE - Step 41 [06/2019 - 04/2020] , or refer to PROCEDURE - Step 41 [04/2020 - 05/2023] , or refer to PROCEDURE - Step 41 [05/2023 - ]

scientia non olet · About LEMON Manuals