Removal [03/2017 - ]: Procedure
- REMOVE COURTESY LIGHT ASSEMBLY
- For LH Side:
- Apply protective tape around the courtesy light assembly.
- Insert moulding remover A between the courtesy light assembly and front door trim board from the front of the vehicle and detach the claw.
- Pull out the courtesy light assembly to detach the hook.
Remove in this Direction - - - Disconnect the connector.
- For RH Side:
- Apply protective tape around the courtesy light assembly.
- Insert moulding remover A between the courtesy light assembly and front door trim board from the rear of the vehicle and detach the claw.
- Pull out the courtesy light assembly to detach the hook.
Remove in this Direction - - - Disconnect the connector.
- For LH Side: