LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2020 >> LC 500 >> Repair and Diagnosis >> Accessories & Equipment >> Infotainment >> Navigation System - Diagnostic Codes (Coupe) (2 Of 2) & Symptom Tests (1 Of 2) >> Navigation System >> Panel Switches do not Function [04/2020 - 05/2023] >> Procedure

Panel Switches do not Function [04/2020 - 05/2023]: Procedure

  1. CHECK PANEL SWITCH 
    1. Check for foreign matter around the switches that might prevent operation.

      OK

      No foreign matter is found.

      Result

      Proceed to
      OK
      NG

    Result: 

    NG 

    REMOVE ANY FOREIGN MATTER FOUND 

    Result: 

    OK 

    See step  2

  2. CHECK PANEL SWITCH (OPERATION CHECK) 
    1. Enter the "Panel & Steering Switch Check Mode" screen. Refer to Check Panel & Steering Switch in Operation Check.
      GTY932671Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      Refer to OPERATION CHECK [04/2020 - 05/2023]

    2. Operate the abnormal switch and check if the switch status is correctly displayed.

      OK

      The switch status is correctly displayed as operated.

      Result

      Proceed to
      OK
      NG

    Result: 

    OK 

    REPLACE RADIO RECEIVER ASSEMBLY. Refer to  REMOVAL [03/2017 - 05/2023] 

    Result: 

    NG 

    PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE. Refer to  PROBLEM SYMPTOMS TABLE [04/2020 - 10/2022]  , or refer to  PROBLEM SYMPTOMS TABLE [10/2022 - 05/2023]