LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2020 >> GX 460 Base >> Repair and Diagnosis >> Drivelines & Axles >> Axle Shafts >> Drive Shaft / Propeller Shaft (Service Information) >> Front Propeller Shaft Assembly >> Removal [08/2015 - ] >> Procedure

Removal [08/2015 - ]: Procedure

  1. REMOVE FRONT EXHAUST PIPE 
    1. Remove the front exhaust pipe (Refer to REMOVAL [08/2015 - ] ).
  2. REMOVE PROPELLER SHAFT HEAT INSULATOR WITH BRACKET 
    GTY255679Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    1. Remove the 2 bolts and propeller shaft heat insulator with bracket.
  3. REMOVE FRONT PROPELLER SHAFT ASSEMBLY 
    1. Place matchmarks on the propeller shaft flange and differential.
      GTY643955Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      TEXT IN ILLUSTRATION

      *1 Matchmark
    2. Remove the 4 nuts, 4 bolts, 4 washers and front propeller shaft assembly.
    3. Place matchmarks on the propeller shaft flange and transfer flange.
      GTY591383Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      TEXT IN ILLUSTRATION

      *1 Matchmark
    4. Remove the 4 nuts, 4 washers and front propeller shaft assembly.
scientia non olet · About LEMON Manuals