Customize Parameters [06/2018 - ]
- CUSTOMIZE LUGGAGE COMPARTMENT DOOR OPENER SYSTEM NOTE:
- When the customer requests a change in a function, first make sure that the function can be customized.
- Be sure to make a note of the current settings before customizing.
- When troubleshooting a function, first make sure that the function is set to the default setting.
HINT:
The following items can be customized.
- Customizing with the Techstream
- Connect the Techstream to the DLC3.
- Turn the engine switch on (IG).
- Turn the Techstream on.
- Enter the following menus: Customize Setting / Door Lock.
- Select the setting by referring to the table below.
Door Lock
Tester Display Description Default Setting ECU Trunk Link with Door Lock Function that opens the luggage compartment door when the luggage electrical key switch is pressed and all doors are unlocked using the entry door lock function, wireless door lock function, mechanical key or door control switch. ON 0:OFF, 1:ON Main body ECU (Multiplex network body ECU)