LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2020 >> ES 300h Luxury >> Repair and Diagnosis >> Transmission >> Transmission Control Systems >> Hybrid Transaxle System (P710) - Service Information >> Shift Lever >> Disassembly [09/2022 - ] >> Procedure

Disassembly [09/2022 - ]: Procedure

  1. REMOVE SHIFT POSITION INDICATOR 
    1. Disconnect the No. 3 combination switch assembly connector and disengage the clamp.
      GTY1124608Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the 2 screws.
      GTY1128804Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. Disengage the claw and guide and remove the shift position indicator from the rear upper console panel sub-assembly.
      GTY1124606Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. REMOVE LOWER POSITION INDICATOR HOUSING 
    1. Disengage the 4 claws and 2 guides to remove the lower position indicator housing from the shift lock control unit assembly.
      GTY809705Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      NOTE:

      Do not damage the lower position indicator housing.

scientia non olet · About LEMON Manuals