DTC C2176: Receiver Error [06/2018 - ]: Procedure

1. Clear the DTCs.

   Chassis > Tire Pressure Monitor > Clear DTCs 

2. Turn the power switch off.
3. Turn the power switch on (IG) and check for DTCs.

   Chassis > Tire Pressure Monitor > Trouble Codes 

   Result

   Result	Proceed to
   C2176 is not output	A
   C2176 is output	B

Result: 

A 

END 

Result: 

B 

REPLACE TIRE PRESSURE WARNING ECU AND RECEIVER. Refer to  REMOVAL [06/2018 - 08/2021]  , or refer to  REMOVAL [08/2021 - 09/2022]  , or refer to  REMOVAL [09/2022 - ]