LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2020 >> ES 300h Luxury >> Repair and Diagnosis >> External Pages >> Different car >> Section 85 (Pre-Collision System (Except Hybrid) - Diagnostic Codes) >> PRE-COLLISION SYSTEM (for Gasoline Model) >> DTC U0100-87: Lost Communication with ECM/PCM "A" Missing Message; DTC U0125-87: Lost Communication with Multi-axis Acceleration Sensor Module Missing Message; DTC U0126-87: Lost Communication with Steering Angle Sensor Module Missing Message; DTC U0129-87: Lost Communication with Brake System Control Module Missing Message [06/2018 - 08/2021] >> Procedure

DTC U0100-87: Lost Communication with ECM/PCM "A" Missing Message; DTC U0125-87: Lost Communication with Multi-axis Acceleration Sensor Module Missing Message; DTC U0126-87: Lost Communication with Steering Angle Sensor Module Missing Message; DTC U0129-87: Lost Communication with Brake System Control Module Missing Message [06/2018 - 08/2021]: Procedure

WARNING: This page is about a different car, the 2021 Lexus ES 350, 2021 Lexus ES 250, 2020 Lexus ES 350, and 2019 Lexus ES 350. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK FOR DTCs 
    1. Clear the DTCs.

      Body Electrical > Pre-Collision System > Clear DTCs 

    2. Make sure that the DTC detection conditions are met.

      HINT: 

      If the detection conditions are not met, the system cannot detect the malfunction.

    3. Check for DTCs.

      Body Electrical > Pre-Collision System > Trouble Codes 

      Result

      Result Proceed to
      DTC U0100-87, U0125-87, U0126-87 and U0129-87 are not output A
      DTC U0100-87, U0125-87, U0126-87 or U0129-87 is output B

    Result: 

    USE SIMULATION METHOD TO CHECK. Refer to  HOW TO PROCEED WITH TROUBLESHOOTING [06/2018 - ] 

    Result: 

    GO TO CAN COMMUNICATION SYSTEM. Refer to  HOW TO PROCEED WITH TROUBLESHOOTING [06/2018 - ]