LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2020 >> ES 300h Luxury >> Repair and Diagnosis >> External Pages >> Different car >> Section 64 (Blind Spot Monitor System (Except Hybrid) - Diagnostic Codes & Circuit Tests) >> BLIND SPOT MONITOR SYSTEM (for Gasoline Model) >> DTC U0232: Lost Communication with Blind Spot Monitor Slave Module [06/2018 - 09/2022] >> Description

DTC U0232: Lost Communication with Blind Spot Monitor Slave Module [06/2018 - 09/2022]: Description

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2024 Lexus ES 350, 2024 Lexus ES 250, 2023 Lexus ES 350, 2023 Lexus ES 250, and 2022 Lexus ES 350. However, it is still accessible from the selected car via links, so may be relevant.

This DTC is stored when the blind spot monitor sensor RH judges that there is a communication problem with the blind spot monitor sensor LH.

DTC No. Detection Item DTC Detection Condition Trouble Area
U0232 Lost Communication with Blind Spot Monitor Slave Module The blind spot monitor sensor (master) cannot receive signals from the blind spot monitor sensor (slave)
  • Open or short in CAN bus main wire or connector
  • Open or short in No. 24 CAN junction connector
  • Blind spot monitor sensor LH
  • Power source circuit of blind spot monitor sensor LH
  • Blind spot monitor sensor LH ground circuit
  • Blind spot monitor sensor RH
  • Harness and connector