LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2020 >> ES 300h Luxury >> Repair and Diagnosis >> External Pages >> Different car >> Section 62 (Panoramic View Monitor System (Except Hybrid) - Diagnostic Codes & Symptom Tests) >> PANORAMIC VIEW MONITOR SYSTEM (for Gasoline Model) >> DTC U1000: CAN Communication Failure (Message Registry) [06/2018 - 09/2022] >> Procedure

DTC U1000: CAN Communication Failure (Message Registry) [06/2018 - 09/2022]: Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2022 Lexus ES 350, 2022 Lexus ES 250, 2021 Lexus ES 350, 2021 Lexus ES 250, and 2020 Lexus ES 350. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK FOR DTC 
    1. Clear the DTCs.

      Chassis > Circumference Monitoring Camera Control Module > Clear DTCs 

      Chassis > Rear Camera > Clear DTCs 

    2. Check for DTCs.

      Chassis > Circumference Monitoring Camera Control Module > Trouble Codes 

      Chassis > Rear Camera > Trouble Codes 

      Result

      Result Proceed to
      No DTCs are output A
      DTC U1000 is output ("Panoramic View Monitor") B
      DTC U1000 is output ("Parking Assist Camera") C

      HINT: 

      If these DTCs are output frequently, duplicate the conditions that cause the problem symptoms and perform troubleshooting again, even if the DTC was not output when rechecking for DTCs.

      Refer to PROBLEM SYMPTOMS TABLE [06/2018 - 09/2022]

    Result: 

    USE SIMULATION METHOD TO CHECK. Refer to  HOW TO PROCEED WITH TROUBLESHOOTING [06/2018 - ] 

    Result: 

    REPLACE PARKING ASSIST ECU. Refer to  REMOVAL [06/2018 - 09/2022] 

    Result: 

    REPLACE REAR TELEVISION CAMERA ASSEMBLY. Refer to  REMOVAL [06/2018 - 09/2022]