LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2020 >> ES 300h Luxury >> Repair and Diagnosis >> External Pages >> Different car >> Section 62 (Panoramic View Monitor System (Except Hybrid) - Diagnostic Codes & Symptom Tests) >> PANORAMIC VIEW MONITOR SYSTEM (for Gasoline Model) >> DTC C2A6C: Side Camera RH Response Malfunction [06/2018 - 09/2022] >> Procedure

DTC C2A6C: Side Camera RH Response Malfunction [06/2018 - 09/2022]: Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2022 Lexus ES 350, 2022 Lexus ES 250, 2021 Lexus ES 350, 2021 Lexus ES 250, and 2020 Lexus ES 350. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK FOR DTC 
    1. Clear the DTCs.

      Chassis > Circumference Monitoring Camera Control Module > Clear DTCs 

    2. Check for DTCs.

      Chassis > Circumference Monitoring Camera Control Module > Trouble Codes 

      OK

      DTC C2A6C is not output.

      Result

      Proceed to
      OK
      NG

    Result: 

    OK 

    USE SIMULATION METHOD TO CHECK. Refer to  HOW TO PROCEED WITH TROUBLESHOOTING [06/2018 - ] 

    Result: 

    NG 

    See step  2

  2. REPLACE SIDE TELEVISION CAMERA ASSEMBLY RH 
    1. Replace the side television camera assembly RH with a new or normally functioning one.

      Refer to REMOVAL [06/2018 - 09/2022]

      Result

      Proceed to
      NEXT

    Result: 

    NEXT 

    See step  3

  3. CHECK FOR DTC 
    1. Clear the DTCs.

      Chassis > Circumference Monitoring Camera Control Module > Clear DTCs 

    2. Check for DTCs.

      Chassis > Circumference Monitoring Camera Control Module > Trouble Codes 

      OK

      DTC C2A6C is not output.

      Result

      Proceed to
      OK
      NG

    Result: 

    OK 

    END (SIDE TELEVISION CAMERA ASSEMBLY RH IS DEFECTIVE) 

    Result: 

    NG 

    REPLACE PARKING ASSIST ECU. Refer to  REMOVAL [06/2018 - 09/2022]