LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2020 >> ES 300h Luxury >> Repair and Diagnosis >> External Pages >> Different car >> Section 62 (Panoramic View Monitor System (Except Hybrid) - Diagnostic Codes & Symptom Tests) >> PANORAMIC VIEW MONITOR SYSTEM (for Gasoline Model) >> DTC C1621: Back Camera Power Supply Failure [06/2018 - 09/2022] >> Caution / Notice / Hint

Caution / Notice / Hint

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2022 Lexus ES 350, 2022 Lexus ES 250, 2021 Lexus ES 350, 2021 Lexus ES 250, and 2020 Lexus ES 350. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
  • Inspect the fuses for circuits related to this system before performing the following procedure.
  • When "!" is displayed on the multi-display assembly after the cable is disconnected from the negative (-) battery terminal, correct the steering angle neutral point.

    Refer to INITIALIZATION [06/2018 - 09/2022]

  • Depending on the parts that are replaced or operations that are performed during vehicle inspection or maintenance, calibration of other systems as well as the panoramic view monitor system may be needed.

    Refer to CALIBRATION [06/2018 - 09/2022]

scientia non olet · About LEMON Manuals