Customize Parameters [06/2018 - 09/2022]
WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2024 Lexus ES 350, 2024 Lexus ES 250, 2023 Lexus ES 350, 2023 Lexus ES 250, and 2022 Lexus ES 350. However, it is still accessible from the selected car via links, so may be relevant.
- CUSTOMIZE POWER DOOR LOCK CONTROL SYSTEM
HINT:
The following items can be customized.
NOTE:- When the customer requests a change in a function, first make sure that the function can be customized.
- Be sure to make a note of the current settings before customizing.
- When troubleshooting a function, first make sure that the function is set to the default setting.
- Customizing with the Techstream
- Connect the Techstream to the DLC3.
- Turn the engine switch on (IG).
- Turn the Techstream on.
- Enter the following menus: Customize Setting / Door Lock.
- Select the setting by referring to the table below.
Door Lock
Tester Display Description Default Setting ECU Unlock Key Twice Function that unlocks only the driver door when the driver door key cylinder is turned to unlock once, and unlocks all doors when it is turned to unlock twice. For the OFF setting, turning it once unlocks all doors. ON 0:OFF, 1:ON Main body ECU (Multiplex network body ECU) Automatic Door Lock Function - Link Shift: Function that locks all doors when the shift lever is moved out of P, with the engine switch on (IG) and all doors closed
- Link Speed: Function that locks all of the doors when the vehicle speed reaches a certain level
Link Shift 00:OFF, 01:Link Shift, 10:Link Speed Main body ECU (Multiplex network body ECU) Automatic Door Unlock Function - Link D-door: Function that unlocks the other doors when the driver door is opened within approximately 43 seconds of the engine switch being turned off
- Link Shift: Function that unlocks all doors when the shift lever is moved to P from any position other than P with the engine switch on (IG)
Link Shift 00:OFF, 01:Link D-door, 10:Link Shift Main body ECU (Multiplex network body ECU)
- Customizing with the multi-display
- Turn the engine switch on (IG).
- Enter the following menus: MENU / Setup / Vehicle / Vehicle Customization / Door Lock Settings.
- Select the setting by referring to the table below.
Display Description Default Setting Relevant ECU Automatic Door Lock - By Shift from P: Function that locks all doors when the shift lever is moved out of P, with the engine switch on (IG) and all doors closed
- By Speed: Function that locks all of the doors when the vehicle speed reaches a certain level
By Shift from P By Speed, By Shift from P or Off Main body ECU (Multiplex network body ECU) Automatic Door Unlock - By Driver Door: Function that unlocks the other doors when the driver door is opened within approximately 43 seconds of the engine switch being turned off
- By Shift to P: Function that unlocks all doors when the shift lever is moved to P from any position other than P with the engine switch on (IG)
By Shift to P By Shift to P, By Driver Door or Off Main body ECU (Multiplex network body ECU)