LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2020 >> ES 300h Luxury >> Repair and Diagnosis >> External Pages >> Different car >> Section 50 (Engine Intake / Exhaust System (2GR-FKS) - Service Information) >> VACUUM SWITCHING VALVE (for ACIS) >> Installation [06/2018 - ] >> Procedure

Installation [06/2018 - ]: Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Lexus ES 350, 2023 Lexus ES 350, 2022 Lexus ES 350, 2021 Lexus ES 350, and 2020 Lexus ES 350. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL NO. 1 VACUUM SWITCHING VALVE ASSEMBLY (for ACIS) 
    1. Install the No. 1 vacuum switching valve assembly (for ACIS) to the intake air surge tank assembly with the bolt.

      Torque: 9.0 N.m (92 kgf/cm, 80 in.lbf) 

    2. Connect the 2 vacuum hose sub-assemblies to the No. 1 vacuum switching valve assembly (for ACIS).
    3. Connect the No. 1 vacuum switching valve assembly (for ACIS) connector.
  2. INSTALL V-BANK COVER SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 47

scientia non olet · About LEMON Manuals