LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2020 >> ES 300h Luxury >> Repair and Diagnosis >> External Pages >> Different car >> Section 4 (Power Trunk Lid System (Except Hybrid) - Diagnostics - Introduction) >> POWER TRUNK LID SYSTEM (for Gasoline Model) >> Customize Parameters [09/2022 - ] >> Customize Parameters [09/2022 - ]

Customize Parameters [09/2022 - ]

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2024 Lexus ES 350, 2024 Lexus ES 250, 2023 Lexus ES 350, 2023 Lexus ES 250, and 2022 Lexus ES 350. However, it is still accessible from the selected car via links, so may be relevant.
  1. CUSTOMIZE LUGGAGE COMPARTMENT DOOR OPENER SYSTEM 
    NOTE:
    • When the customer requests a change in a function, first make sure that the function can be customized.
    • Be sure to make a note of the current settings before customizing.
    • When troubleshooting a function, first make sure that the function is set to the default setting.

    HINT: 

    The following items can be customized.

    1. Customizing with the Techstream
      1. Connect the Techstream to the DLC3.
      2. Turn the engine switch on (IG).
      3. Turn the Techstream on.
      4. Enter the following menus: Customize Setting / PSD & PBD operation or Door Lock.
      5. Select the setting by referring to the table below.

        PSD & PBD operation 

        Tester Display Description Default Setting ECU
        PBD Kick-in Beep Sound Function that sounds a buzzer when a kick operation detected. ON $00:OFF,$01:ON Luggage closer motor assembly
        PBD Power Closer Operation Setting Status of the power trunk lid and luggage compartment door closer setting Power Operation ON/Closer Operation ON $00:Power Operation OFF/Closer Operation OFF,$01:Power Operation OFF/Closer Operation ON,$03:Power Operation ON/Closer Operation ON Luggage closer motor assembly
        PBD Kick Sensor Function Function that enables/disables the hands free power trunk lid ON $00:OFF,$01:ON Luggage closer motor assembly

        Door Lock 

        Tester Display Description Default Setting ECU
        Trunk Link with Door Lock Function that opens the luggage compartment door when the luggage electrical key switch is pressed and all doors are unlocked using the entry door lock function, wireless door lock function, mechanical key or door control switch. ON 0:OFF, 1:ON Main body ECU (multiplex network body ECU)
    2. Customizing with the combination meter assembly
      1. Turn the engine switch on (IG).
      2. Enter the following menus: Vehicle Settings.
      3. Select the setting by referring to the table below.
        Display Description Default Setting ECU
        KICK SENSOR Function that can be used to set the hands free power trunk lid. On On or Off Luggage closer motor assembly