LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2020 >> ES 300h Luxury >> Repair and Diagnosis >> External Pages >> Different car >> Section 26 (Smart Access System (For Start) (Except Hybrid) - Symptom Tests) >> SMART ACCESS SYSTEM WITH PUSH-BUTTON START (for Start Function, Gasoline Model) >> Power Source Mode does not Change to ON (IG) [06/2018 - ] >> Description

Power Source Mode does not Change to ON (IG) [06/2018 - ]: Description

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2024 Lexus ES 350, 2024 Lexus ES 250, 2023 Lexus ES 350, 2023 Lexus ES 250, and 2022 Lexus ES 350. However, it is still accessible from the selected car via links, so may be relevant.

If the engine switch is pressed with the electrical key transmitter sub-assembly in the cabin, the certification ECU (smart key ECU assembly) receives a signal and changes the power source mode.

RELATED DATA LIST AND ACTIVE TEST ITEMS

Problem Symptom Data List and Active Test
Power source mode does not change to on (IG) but does change to on (ACC) Power Source Control 
  • Power Supply Condition
  • IG Relay Monitor (Inside)
  • IG Relay Monitor (Outside)
  • IG Circuit

Starting Control 
  • Ignition
scientia non olet · About LEMON Manuals