DTC U0101: Lost Communication with TCM; DTC U0122: Lost Communication With Vehicle Dynamics Control Module; DTC U0142: Lost Communication With Body Control Module "B"; DTC U0155: Lost Communication With Instrument Panel Cluster (IPC) Control Module; DTC U0327: Lost Communication with Vehicle Security Control Module; DTC U1117: Lost Communication with Accessory Gateway [06/2018 - 08/2021]: Procedure
WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2024 Lexus ES 350, 2024 Lexus ES 250, 2023 Lexus ES 350, 2023 Lexus ES 250, and 2022 Lexus ES 350. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK FOR DTC
- Connect the Techstream to the DLC3.
- Turn the engine switch on (IG).
- Turn the Techstream on.
- Enter the following menus: Body Electrical / Back Door / Trouble Codes.
- Clear the DTCs.
Body Electrical > Back Door > Clear DTCs
- Check for DTCs.
Body Electrical > Back Door > Trouble Codes
HINT:
If DTCs related to a malfunction in the CAN communication system are output, refer to "How to Proceed with Troubleshooting" for the CAN communication system.
Refer to HOW TO PROCEED WITH TROUBLESHOOTING [06/2018 - ]
OK
DTC U0101, U0122, U0142, U0155, U0327 and U1117 is not output.
Result
Proceed to OK NG
Result:
OK
USE SIMULATION METHOD TO CHECK. Refer to HOW TO PROCEED WITH TROUBLESHOOTING [06/2018 - ]
Result:
NG
GO TO CAN COMMUNICATION SYSTEM. Refer to HOW TO PROCEED WITH TROUBLESHOOTING [06/2018 - ]