LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2020 >> ES 300h Luxury >> Repair and Diagnosis >> External Pages >> Different car >> Section 216 (Lighting System (Ext) (Except Hybrid) - Symptom Tests & Circuit Tests) >> LIGHTING SYSTEM (for Gasoline Model) >> Automatic High Beam System does not Operate or Operation Indicator does not Illuminate [06/2018 - 08/2020] >> Caution / Notice / Hint

Caution / Notice / Hint

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2024 Lexus ES 350, 2024 Lexus ES 250, 2023 Lexus ES 350, 2023 Lexus ES 250, and 2022 Lexus ES 350. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
  • Before replacing the main body ECU (multiplex network body ECU), refer to Registration.

    Refer to REGISTRATION [06/2018 - 10/2019] , or refer to REGISTRATION [10/2019 - 08/2020]

  • When replacing the forward recognition camera, always replace it with a new one. If a forward recognition camera which was installed to another vehicle is used, the information stored in the forward recognition camera will not match the information from the vehicle. As a result, a DTC may be stored.
  • If the forward recognition camera has been replaced with a new one, be sure to perform Forward Recognition Camera Learning.

    Refer to ADJUSTMENT (SEQUENTIAL RECOGNITION) [06/2018 - 08/2021]

  • Before performing troubleshooting, check that the low beam headlights and high beam headlights illuminate correctly.
  • When replacing the combination meter assembly, always replace it with a new one. If a combination meter assembly which was installed to another vehicle is used, the information stored in it will not match the information from the vehicle and a DTC may be stored.
  • If the forward recognition camera cannot operate due to high vehicle interior temperatures, bad weather (rain, fog, etc.) or fogged up or dirty glass, the automatic high beam system will not operate and the automatic high beam indicator will not illuminate.
  • Before performing troubleshooting, check that the front radar sensor system operates correctly.

    Refer to HOW TO PROCEED WITH TROUBLESHOOTING [06/2018 - 08/2021]