LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2020 >> ES 300h Luxury >> Repair and Diagnosis >> External Pages >> Different car >> Section 211 (Navigation System (Except Hybrid) - Diagnostic Codes (2 Of 2) & Symptom Tests (1 Of 2)) >> NAVIGATION SYSTEM (for Gasoline Model) >> Cursor or Map Rotates when Vehicle Stopped [06/2018 - 09/2022] >> Procedure

Cursor or Map Rotates when Vehicle Stopped [06/2018 - 09/2022]: Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2022 Lexus ES 350, 2022 Lexus ES 250, 2021 Lexus ES 350, 2021 Lexus ES 250, and 2020 Lexus ES 350. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK CONDITION 
    1. Check with the customer if the vehicle has been turned by a turntable.
      GTY107958Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      OK

      Vehicle has not been turned by a turntable.

      HINT: 

      If the vehicle is turned on a turntable with the engine switch on (IG), the system may store the angular velocity. As a result, the vehicle position cursor may deviate. In this case, the vehicle position cursor will return to normal by turning the engine switch off and back to on (IG) again with the vehicle completely stopped.

      Result

      Proceed to
      OK
      NG

    Result: 

    OK 

    PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE. Refer to  PROBLEM SYMPTOMS TABLE [06/2018 - 10/2019]  , or refer to  PROBLEM SYMPTOMS TABLE [10/2019 - 08/2020]  , or refer to  PROBLEM SYMPTOMS TABLE [08/2020 - 08/2021]  , or refer to  PROBLEM SYMPTOMS TABLE [08/2021 - 09/2022] 

    Result: 

    NG 

    TURN ENGINE SWITCH ON (IG) WHEN VEHICLE IS COMPLETELY STOPPED