LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2020 >> ES 300h Luxury >> Repair and Diagnosis >> External Pages >> Different car >> Section 204 (Parking Support Brake System - Diagnostic Codes) >> Parking Support Brake System >> DTC U1177-87: Lost Communication with Side Obstacle Detection Control Module "A" (ch2) Missing Message; DTC U1178-87: Lost Communication with Side Obstacle Detection Control Module "B" (ch2) Missing Message [09/2022 - ] >> Description

DTC U1177-87: Lost Communication with Side Obstacle Detection Control Module "A" (ch2) Missing Message; DTC U1178-87: Lost Communication with Side Obstacle Detection Control Module "B" (ch2) Missing Message [09/2022 - ]: Description

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Lexus ES 350, 2024 Lexus ES 300h, 2024 Lexus ES 250, 2023 Lexus ES 350, and 2023 Lexus ES 300h. However, it is still accessible from the selected car via links, so may be relevant.

This DTC is output when the clearance warning ECU assembly detects lost communication with the blind spot monitor sensor.

DTC No. Detection Item DTC Detection Condition Trouble Area
U1177-87 Lost Communication with Side Obstacle Detection Control Module "A" (ch2) Missing Message The clearance warning ECU assembly is unable to receive communication from the blind spot monitor sensor LH (A)
  • Open or short in CAN bus main wire or connector
  • Open or short in CAN bus wire or connector
  • Open or short in No. 24 CAN junction connector
  • Clearance warning ECU assembly
  • Blind spot monitor sensor LH (A)
  • Power source circuit of blind spot monitor sensor LH (A)
  • Blind spot monitor sensor LH (A) ground circuit
  • Blind spot monitor sensor RH (B)
U1178-87 Lost Communication with Side Obstacle Detection Control Module "B" (ch2) Missing Message The clearance warning ECU assembly is unable to receive communication from the blind spot monitor sensor RH (B)
  • Open or short in CAN bus main wire or connector
  • Open or short in CAN bus wire or connector
  • Open or short in No. 24 CAN junction connector
  • Clearance warning ECU assembly
  • Blind spot monitor sensor RH (B)
  • Power source circuit of blind spot monitor sensor RH (B)
  • Blind spot monitor sensor RH (B) ground circuit
  • Blind spot monitor sensor LH (A)