Removal [06/2018 - ]: Procedure
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Lexus ES 350, 2023 Lexus ES 350, 2022 Lexus ES 350, 2021 Lexus ES 350, and 2020 Lexus ES 350. However, it is still accessible from the selected car via links, so may be relevant.
- REMOVE COOL AIR INTAKE DUCT SEAL
Refer to PROCEDURE - Step 1 [06/2018 - 08/2021] , or refer to PROCEDURE - Step 1 [08/2021 - 09/2022] , or refer to PROCEDURE - Step 1 [09/2022 - ]
- REMOVE INLET AIR CLEANER ASSEMBLY
Refer to PROCEDURE - Step 20 [06/2018 - 10/2019] , or refer to PROCEDURE - Step 20 [10/2019 - 08/2021] , or refer to PROCEDURE - Step 20 [08/2021 - 09/2022] , or refer to PROCEDURE - Step 20 [09/2022 - ]
- REMOVE AIR CLEANER ASSEMBLY WITH AIR CLEANER HOSE
Refer to PROCEDURE - Step 21 [06/2018 - 10/2019] , or refer to PROCEDURE - Step 21 [10/2019 - 08/2021] , or refer to PROCEDURE - Step 21 [08/2021 - 09/2022] , or refer to PROCEDURE - Step 21 [09/2022 - ]
- REMOVE VACUUM SWITCHING VALVE (for Active Control Engine Mount System)
- Remove the bolt and disengage the wire harness clamp to separate the engine wire.
- Remove the 2 bolts.
- Disengage the wire harness clamp and disconnect the vacuum switching valve (for active control engine mount system) connector.
- Disconnect the 3 vacuum hoses from the vacuum switching valve (for active control engine mount system).
- Remove the nut and vacuum switching valve (for active control engine mount system) from the front engine mounting insulator.
- Remove the bolt and disengage the wire harness clamp to separate the engine wire.