Installation [06/2018 - ]: Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Lexus ES 350, 2023 Lexus ES 350, 2022 Lexus ES 350, 2021 Lexus ES 350, and 2020 Lexus ES 350. However, it is still accessible from the selected car via links, so may be relevant.

INSTALL VACUUM SWITCHING VALVE (for Active Control Engine Mount System)
1. Install the vacuum switching valve (for active control engine mount system) to the front engine mounting insulator with the nut.
  Torque: 6.0 N.m (61 kgf/cm, 53 in.lbf)
2. Connect the 3 vacuum hoses to the vacuum switching valve (for active control engine mount system).
3. Engage the wire harness clamp and connect the vacuum switching valve (for active control engine mount system) connector.
4. Install the 2 bolts.
  Torque: 10 N.m (102 kgf/cm, 7 ft.lbf)
5. Engage the wire harness clamp and install the engine wire with the bolt.
  Torque: 8.0 N.m (82 kgf/cm, 71 in.lbf)
INSTALL AIR CLEANER ASSEMBLY WITH AIR CLEANER HOSE
Refer to PROCEDURE - Step 45
INSTALL INLET AIR CLEANER ASSEMBLY
Refer to PROCEDURE - Step 46
INSTALL COOL AIR INTAKE DUCT SEAL
Refer to PROCEDURE - Step 2 [06/2018 - 08/2021] , or refer to PROCEDURE - Step 2 [08/2021 - 09/2022] , or refer to PROCEDURE - Step 2 [09/2022 - ]