Removal [06/2018 - ]: Procedure
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Lexus ES 350, 2023 Lexus ES 350, 2022 Lexus ES 350, 2021 Lexus ES 350, and 2020 Lexus ES 350. However, it is still accessible from the selected car via links, so may be relevant.
- REMOVE INTAKE AIR SURGE TANK ASSEMBLY
Refer to REMOVAL [06/2018 - 08/2021]
, or refer to REMOVAL [08/2021 - 09/2022]
, or refer to REMOVAL [09/2022 - ]
- REMOVE VVT SENSOR (for Intake Side of Bank 1)
- Disconnect the VVT sensor connector.
 Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
- Remove the bolt and VVT sensor from the cylinder head cover sub-assembly.
NOTE:
If the VVT sensor has been struck or dropped, replace it.
- REMOVE VVT SENSOR (for Exhaust Side of Bank 1)
- Disconnect the VVT sensor connector.
 Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
- Remove the bolt and VVT sensor from the cylinder head cover sub-assembly.
NOTE:
If the VVT sensor has been struck or dropped, replace it.
- REMOVE VVT SENSOR (for Intake Side of Bank 2)
- Disconnect the VVT sensor connector.
 Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
- Remove the bolt and VVT sensor from the cylinder head cover sub-assembly LH.
NOTE:
If the VVT sensor has been struck or dropped, replace it.
- REMOVE VVT SENSOR (for Exhaust Side of Bank 2)
- Disconnect the VVT sensor connector.
 Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
- Remove the bolt and VVT sensor from the cylinder head cover sub-assembly LH.
NOTE:
If the VVT sensor has been struck or dropped, replace it.