LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2020 >> ES 300h Luxury >> Repair and Diagnosis >> External Pages >> Different car >> Section 176 (Parking Assist Monitor System (Except Hybrid) - Diagnostic Codes & Symptom Tests) >> PARKING ASSIST MONITOR SYSTEM (for Gasoline Model) >> DTC U1000: CAN Communication Failure (Message Registry) [06/2018 - 09/2022] >> Procedure

DTC U1000: CAN Communication Failure (Message Registry) [06/2018 - 09/2022]: Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2022 Lexus ES 350, 2022 Lexus ES 250, 2021 Lexus ES 350, 2021 Lexus ES 250, and 2020 Lexus ES 350. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK DTC OUTPUT 
    1. Clear the DTCs.

      Chassis > Rear Camera > Clear DTCs 

    2. Recheck for DTCs and check that no DTCs are output.

      Chassis > Rear Camera > Trouble Codes 

      HINT: 

      • If the DTC is not output again when rechecking for DTCs, it may have been stored due to a temporary CAN malfunction.
      • If DTC U1000 is stored frequently but is not output when rechecking for DTCs, attempt to reproduce the conditions when the malfunction occurred.

        Refer to HOW TO PROCEED WITH TROUBLESHOOTING [06/2018 - ]

      Result

      Result Proceed to
      DTC U1000 is output A
      DTC U1000 is not output B

    Result: 

    REPLACE REAR TELEVISION CAMERA ASSEMBLY. Refer to  REMOVAL [06/2018 - 09/2022] 

    Result: 

    USE SIMULATION METHOD TO CHECK. Refer to  HOW TO PROCEED WITH TROUBLESHOOTING [06/2018 - ]