LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2020 >> ES 300h Luxury >> Repair and Diagnosis >> External Pages >> Different car >> Section 176 (Parking Assist Monitor System (Except Hybrid) - Diagnostic Codes & Symptom Tests) >> PARKING ASSIST MONITOR SYSTEM (for Gasoline Model) >> Black Screen [06/2018 - 09/2022] >> Procedure

Black Screen [06/2018 - 09/2022]: Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2022 Lexus ES 350, 2022 Lexus ES 250, 2021 Lexus ES 350, 2021 Lexus ES 250, and 2020 Lexus ES 350. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK HARNESS AND CONNECTOR (REAR TELEVISION CAMERA ASSEMBLY - MULTI-DISPLAY ASSEMBLY) 

    See step  1

    Result

    Proceed to
    OK
    NG

    Result: 

    NG 

    REPAIR OR REPLACE HARNESS OR CONNECTOR 

    Result: 

    OK 

    See step  2

  2. INSPECT MULTI-DISPLAY ASSEMBLY (CA+, CGND) 

    See step  2

    Result

    Proceed to
    OK
    NG

    Result: 

    NG 

    REPLACE MULTI-DISPLAY ASSEMBLY See step   4 

    Result: 

    OK 

    See step  3

  3. INSPECT MULTI-DISPLAY ASSEMBLY (V+, GND1) 

    See step  3

    Result

    Proceed to
    OK
    NG

    Result: 

    NG 

    REPLACE REAR TELEVISION CAMERA ASSEMBLY. Refer to  REMOVAL [06/2018 - 09/2022] 

    Result: 

    OK 

    See step  4

  4. REPLACE MULTI-DISPLAY ASSEMBLY 
    1. Replace the multi-display assembly with a new or known good one.

      Refer to REMOVAL [06/2018 - 08/2021] , or refer to REMOVAL [08/2021 - ]

    2. Check that the parking assist monitor system operates normally.

      OK

      Parking assist monitor system operates normally.

      Result

      Proceed to
      OK
      NG

    Result: 

    OK 

    END 

    Result: 

    NG 

    REPLACE REAR TELEVISION CAMERA ASSEMBLY. Refer to  REMOVAL [06/2018 - 09/2022]