Reassembly [06/2018 - ]: Procedure
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Lexus ES 350, 2023 Lexus ES 350, 2022 Lexus ES 350, 2021 Lexus ES 350, and 2020 Lexus ES 350. However, it is still accessible from the selected car via links, so may be relevant.
- INSTALL OIL PUMP ROTOR SET
- Coat the drive rotor and driven rotor with engine oil and place them into the timing chain cover assembly with the rotor marks facing up. Check that the rotors rotate smoothly.
 Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
- INSTALL OIL PUMP COVER
- Install the oil pump cover to the timing chain cover assembly with the 8 bolts.
 Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
Torque: 9.1 N.m (93 kgf/cm, 81 in.lbf)
Bolt Length
| Item |
Length |
| Bolt (A) |
22 mm (0.866 in.) |
| Bolt (B) |
40 mm (1.57 in.) |
- INSTALL OIL PUMP RELIEF VALVE
- Coat the oil pump relief valve with engine oil.
- Insert the oil pump relief valve and oil pump relief valve spring into the valve hole.
- Using a 27 mm socket wrench, install the oil pump relief valve plug to the oil pump cover.
Torque: 49 N.m (500 kgf/cm, 36 ft.lbf)
 Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|