LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2020 >> ES 300h Luxury >> Repair and Diagnosis >> External Pages >> Different car >> Section 160 (Engine Lubrication System (2GR-FKS) - Service Information) >> Oil Level Sensor >> Installation [06/2018 - ] >> Procedure

Installation [06/2018 - ]: Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Lexus ES 350, 2023 Lexus ES 350, 2022 Lexus ES 350, 2021 Lexus ES 350, and 2020 Lexus ES 350. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL ENGINE OIL LEVEL SENSOR 
    1. Install the engine oil level sensor to the oil pan sub-assembly with the 2 nuts.

      Torque: 10 N.m (102 kgf/cm, 7 ft.lbf) 

    2. Install a new clip to the engine oil level sensor.
  2. INSTALL OIL STRAINER SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 53

  3. INSTALL NO. 2 OIL PAN SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 54

  4. REMOVE ENGINE ASSEMBLY FROM ENGINE STAND 

    Refer to INSTALLATION [06/2018 - ]

scientia non olet · About LEMON Manuals