LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2020 >> ES 300h Luxury >> Repair and Diagnosis >> External Pages >> Different car >> Section 152 (Automatic Transmission System (UA80E) - Service Information (1 Of 4)) >> Park / Neutral Position Switch >> On-Vehicle Inspection [06/2018 - ] >> Procedure

On-Vehicle Inspection [06/2018 - ]: Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Lexus ES 350, 2023 Lexus ES 350, 2022 Lexus ES 350, 2021 Lexus ES 350, and 2020 Lexus ES 350. However, it is still accessible from the selected car via links, so may be relevant.
  1. SECURE VEHICLE 
    1. Fully apply the parking brake and chock a wheel.
      WARNING:
      • Make sure to apply the parking brake and chock a wheel before performing this procedure.
      • If the vehicle is not secure and the shift lever is moved to N, the vehicle may suddenly move, possibly resulting in an accident or serious injury.
      GTY655852Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSPECT PARK/NEUTRAL POSITION SWITCH ASSEMBLY OPERATION 
    1. Turn the engine switch on (IG).
    2. Depress the brake pedal and check that the engine can be started when the shift lever is in N or P, but cannot be started in any other position.
    3. Check that the back-up lights come on when the shift lever is moved to R, but do not come on with the shift lever in any other position.

      If the operation is not as specified, check the park/neutral position switch assembly.

      Refer to ADJUSTMENT [06/2018 - 08/2021] , or refer to ADJUSTMENT [08/2021 - 09/2022] , or refer to ADJUSTMENT [09/2022 - ] 

scientia non olet · About LEMON Manuals