LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2020 >> ES 300h Luxury >> Repair and Diagnosis >> External Pages >> Different car >> Section 152 (Automatic Transmission System (UA80E) - Service Information (1 Of 4)) >> Automatic Transaxle Fluid >> Replacement [06/2018 - ] >> Procedure

Replacement [06/2018 - ]: Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Lexus ES 350, 2023 Lexus ES 350, 2022 Lexus ES 350, 2021 Lexus ES 350, and 2020 Lexus ES 350. However, it is still accessible from the selected car via links, so may be relevant.
  1. REMOVE FRONT WHEEL OPENING EXTENSION PAD LH 

    Refer to PROCEDURE - Step 7 [06/2018 - 10/2019] , or refer to PROCEDURE - Step 7 [10/2019 - 08/2021] , or refer to PROCEDURE - Step 7 [08/2021 - 09/2022] , or refer to PROCEDURE - Step 7 [09/2022 - ]

  2. REMOVE FRONT WHEEL OPENING EXTENSION PAD RH 

    Refer to PROCEDURE - Step 8 [06/2018 - 10/2019] , or refer to PROCEDURE - Step 8 [10/2019 - 08/2021] , or refer to PROCEDURE - Step 8 [08/2021 - 09/2022] , or refer to PROCEDURE - Step 8 [09/2022 - ]

  3. REMOVE NO. 1 ENGINE UNDER COVER 

    Refer to PROCEDURE - Step 9 [06/2018 - 10/2019] , or refer to PROCEDURE - Step 9 [10/2019 - 08/2021] , or refer to PROCEDURE - Step 9 [08/2021 - 09/2022] , or refer to PROCEDURE - Step 9 [09/2022 - ]

  4. REMOVE NO. 3 ENGINE UNDER COVER 

    Refer to PROCEDURE - Step 10 [06/2018 - 10/2019] , or refer to PROCEDURE - Step 10 [10/2019 - 08/2021] , or refer to PROCEDURE - Step 10 [08/2021 - 09/2022] , or refer to PROCEDURE - Step 10 [09/2022 - ]

  5. REMOVE FRONT FENDER APRON SEAL LH 

    Refer to PROCEDURE - Step 12 [06/2018 - 10/2019] , or refer to PROCEDURE - Step 12 [10/2019 - 08/2021] , or refer to PROCEDURE - Step 12 [08/2021 - 09/2022] , or refer to PROCEDURE - Step 12 [09/2022 - ]

  6. REPLACE AUTOMATIC TRANSAXLE FLUID 

    Refer to PROCEDURE - Step 6

  7. ADD SPECIFIED AMOUNT OF AUTOMATIC TRANSAXLE FLUID 

    See step  5 [06/2018 - 08/2020], or see step  5 [08/2020 - ]

  8. ADJUST AUTOMATIC TRANSAXLE FLUID TEMPERATURE (when Using the Techstream) 

    See step  6 [06/2018 - 08/2020], or see step  6 [08/2020 - ]

  9. ADJUST AUTOMATIC TRANSAXLE FLUID TEMPERATURE (when Not Using the Techstream) 

    See step  7 [06/2018 - 08/2020], or see step  7 [08/2020 - ]

  10. ADJUST AUTOMATIC TRANSAXLE FLUID LEVEL 

    See step  8 [06/2018 - 08/2020], or see step  8 [08/2020 - ]

  11. REBUILD WORK 

    See step  9 [06/2018 - 08/2020], or see step  9 [08/2020 - ]

  12. INSTALL FRONT FENDER APRON SEAL LH 

    Refer to PROCEDURE - Step 66

  13. INSTALL NO. 3 ENGINE UNDER COVER 

    Refer to PROCEDURE - Step 69

  14. INSTALL NO. 1 ENGINE UNDER COVER 

    Refer to PROCEDURE - Step 70

  15. INSTALL FRONT WHEEL OPENING EXTENSION PAD LH 

    Refer to PROCEDURE - Step 71

  16. INSTALL FRONT WHEEL OPENING EXTENSION PAD RH 

    Refer to PROCEDURE - Step 72

scientia non olet · About LEMON Manuals