LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2020 >> ES 300h Luxury >> Repair and Diagnosis >> External Pages >> Different car >> Section 148 (Engine Control System (2GR-FKS) - Diagnostic Codes (01 Of 10)) >> SFI System >> DTC P0011-07: Camshaft Position "A" - Timing Over-Advanced or System Performance Bank 1 Mechanical Failure; DTC P0021-07: Camshaft Position "A" - Timing Over-Advanced or System Performance Bank 2 Mechanical Failure [06/2018 - 08/2021] >> Description

DTC P0011-07: Camshaft Position "A" - Timing Over-Advanced or System Performance Bank 1 Mechanical Failure; DTC P0021-07: Camshaft Position "A" - Timing Over-Advanced or System Performance Bank 2 Mechanical Failure [06/2018 - 08/2021]: Description

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Lexus ES 350, 2023 Lexus ES 350, 2022 Lexus ES 350, 2021 Lexus ES 350, and 2020 Lexus ES 350. However, it is still accessible from the selected car via links, so may be relevant.

Refer to DTC P0010-13.

Refer to DESCRIPTION 

DTC No. Detection Item DTC Detection Condition Trouble Area MIL Memory Note
P0011-07 Camshaft Position "A" - Timing Over-Advanced or System Performance Bank 1 Mechanical Failure 10° CA or greater camshaft timing gear assembly (bank 1) run-out maintained for 0.6 seconds or longer for 2 times (1 trip detection logic).
  • Cam timing oil control solenoid assembly (for intake camshaft of bank 1)
  • Camshaft timing gear bolt (camshaft timing oil control valve assembly [for intake camshaft of bank 1])
  • Camshaft timing gear assembly (bank 1)
  • ECM
Comes on DTC stored SAE Code: P0011
P0021-07 Camshaft Position "A" - Timing Over-Advanced or System Performance Bank 2 Mechanical Failure 10° CA or greater camshaft timing gear assembly (bank 2) run-out maintained for 0.6 seconds or longer for 2 times (1 trip detection logic).
  • Cam timing oil control solenoid assembly (for intake camshaft of bank 2)
  • Camshaft timing gear bolt (camshaft timing oil control valve assembly [for intake camshaft of bank 2])
  • Camshaft timing gear assembly (bank 2)
  • ECM
Comes on DTC stored SAE Code: P0021