Installation [06/2018 - ]: Procedure
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Lexus ES 350, 2023 Lexus ES 350, 2022 Lexus ES 350, 2021 Lexus ES 350, and 2020 Lexus ES 350. However, it is still accessible from the selected car via links, so may be relevant.
- INSTALL PURGE VALVE (PURGE VSV)
- Install the purge valve (purge VSV) to the intake air surge tank assembly with the bolt.
Torque: 21 N.m (214 kgf/cm, 15 ft.lbf)
*1 No. 1 Fuel Vapor Feed Hose *2 Fuel Vapor Feed Hose *a View A *b RH Side *c Front *d 120° - Connect the No. 1 fuel vapor feed hose to the purge valve (purge VSV).
- Connect the fuel vapor feed hose to the purge valve (purge VSV) and slide the clip to secure it.
HINT:
Engage the clip within the area shown in the illustration.
- Connect the purge valve (purge VSV) connector.
- Install the purge valve (purge VSV) to the intake air surge tank assembly with the bolt.
- INSTALL V-BANK COVER SUB-ASSEMBLY
Refer to PROCEDURE - Step 47