Installation [06/2018 - ]: Procedure
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Lexus ES 350, 2023 Lexus ES 350, 2022 Lexus ES 350, 2021 Lexus ES 350, and 2020 Lexus ES 350. However, it is still accessible from the selected car via links, so may be relevant.
- INSTALL PCV VALVE (VENTILATION VALVE SUB-ASSEMBLY)
- Apply a light coat of engine oil to the O-ring.
- Using a 22 mm deep socket wrench, install the PCV valve (ventilation valve sub-assembly) to the cylinder head cover sub-assembly LH.
Torque: 5.0 N.m (51 kgf/cm, 44 in.lbf)
NOTE:When reusing the PCV valve (ventilation valve sub-assembly), inspect the O-ring.
- CONNECT VENTILATION HOSE
- Connect the ventilation hose to the PCV valve (ventilation valve sub-assembly) and slide the clip to secure it.
- INSTALL V-BANK COVER SUB-ASSEMBLY
Refer to PROCEDURE - Step 47