LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2020 >> ES 300h Luxury >> Repair and Diagnosis >> External Pages >> Different car >> Section 132 (Emission Control System (2GR-FKS) - Service Information) >> PCV Valve >> Inspection [06/2018 - ] >> Procedure

Inspection [06/2018 - ]: Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Lexus ES 350, 2023 Lexus ES 350, 2022 Lexus ES 350, 2021 Lexus ES 350, and 2020 Lexus ES 350. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSPECT PCV VALVE (VENTILATION VALVE SUB-ASSEMBLY) 
    1. Install a hose to the PCV valve (ventilation valve sub-assembly).
    2. Check PCV valve (ventilation valve sub-assembly) operation.
      1. Blow air into the cylinder head cover sub-assembly LH side, and check that air passes through easily.
        GTY502416Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
        *a Hose
        *b Air
        Cylinder Head Cover Sub-assembly LH Side
        WARNING:

        Do not suck air through the valve.

        Petroleum substances inside the valve are hazardous to your health.

        If the result is not as specified, replace the PCV valve (ventilation valve sub-assembly).

      2. Blow air into the intake air surge tank assembly side, and check that air passes through with difficulty.
        GTY517336Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
        *a Hose
        *b Air
        Intake Air Surge Tank Assembly Side
        WARNING:

        Do not suck air through the valve.

        Petroleum substances inside the valve are hazardous to your health.

        If the result is not as specified, replace the PCV valve (ventilation valve sub-assembly).

    3. Remove the hose from the PCV valve (ventilation valve sub-assembly).