Removal [06/2018 - 08/2021]: Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Lexus ES 350, 2023 Lexus ES 350, 2022 Lexus ES 350, 2021 Lexus ES 350, and 2020 Lexus ES 350. However, it is still accessible from the selected car via links, so may be relevant.

REMOVE FUEL SUCTION TUBE WITH PUMP AND GAUGE ASSEMBLY
Refer to REMOVAL [06/2018 - 08/2021]
REMOVE FUEL PUMP WITH FILTER ASSEMBLY
Refer to DISASSEMBLY [06/2018 - ]

REMOVE FUEL MAIN VALVE ASSEMBLY

Remove the fuel main valve assembly (for Low Pressure).

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Remove the clip from the fuel filter.

Using a screwdriver with its tip wrapped with protective tape, remove the fuel main valve assembly from the fuel filter.

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

*a	Protective Tape

NOTE:

Pull out the fuel main valve assembly carefully because the O-rings are firmly installed between the fuel main valve assembly and fuel filter.
Do not damage the fuel filter.

Remove the 2 O-rings from the fuel main valve assembly.

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

O-ring

Remove the fuel main valve assembly (for High Pressure).

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Remove the clip from the fuel filter.

Using a screwdriver with its tip wrapped with protective tape, remove the fuel main valve assembly from the fuel filter.

*a	Protective Tape

NOTE:

Pull out the fuel main valve assembly carefully because the O-rings are firmly installed between the fuel main valve assembly and fuel filter.
Do not damage the fuel filter.

Remove the 2 O-rings from the fuel main valve assembly.

O-ring