Typical Enabling Conditions
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Lexus ES 350, 2023 Lexus ES 350, 2022 Lexus ES 350, 2021 Lexus ES 350, and 2020 Lexus ES 350. However, it is still accessible from the selected car via links, so may be relevant.
| All of the following conditions are met | - |
| Time after engine switch on (IG) and engine not running | Less than 20 seconds |
| Soak Time | 7 hours or more |
| Battery voltage | 10.5 V or higher |
| Time after engine start | 88 seconds or more |
| Either of the following conditions is met | (a) or (b) |
| (a) Minimum intake air temperature after engine start | -10°C (14°F) or higher |
| (b) Engine coolant temperature before engine start | -10°C (14°F) or higher |
| Engine coolant temperature sensor circuit fail (P0117, P0118, P0125) | Not detected |
| Intake air temperature sensor circuit fail (P0112, P0113) | Not detected |
| Mass air flow meter circuit fail (P0102, P0103) | Not detected |
| Soak timer fail (P2610) | Not detected |