Typical Enabling Conditions
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Lexus ES 350, 2023 Lexus ES 350, 2022 Lexus ES 350, 2021 Lexus ES 350, and 2020 Lexus ES 350. However, it is still accessible from the selected car via links, so may be relevant.
| All of the following conditions are met | - |
| Throttle position voltage | 0.2 V or higher, and less than 2.0 V |
| Time after engine start | 5 seconds or more |
| Battery voltage | 10.5 V or higher |
| Estimated load | 30% or higher, and less than 70% |
| Engine coolant temperature | 70°C (158°F) or higher |
| Mass air flow meter circuit fail (P0102, P0103) | Not detected |
| Intake air temperature sensor circuit fail (P0112, P0113) | Not detected |
| Engine coolant temperature sensor circuit fail (P0117, P0118) | Not detected |
| Crankshaft position sensor circuit fail (P0335, P0337, P0338) | Not detected |
| Throttle position sensor circuit fail (P0121, P0122, P0123, P0222, P0223, P2135) | Not detected |
| EVAP system pressure sensor circuit fail (P0452, P0453) | Not detected |
| Leak detection pump fail (P2401, P2402) | Not detected |
| EVAP system vent valve fail (P2419, P2420) | Not detected |