LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2020 >> ES 300h Luxury >> Repair and Diagnosis >> External Pages >> Different car >> Section 123 (Engine Control System (2GR-FKS) - Diagnostic Codes (10 Of 10) & Circuit Tests (1 Of 2)) >> SFI System >> DTC P2610-29: ECM/PCM Engine Off Timer Performance Signal Invalid; DTC P2610-93: ECM/PCM Engine Off Timer Performance No Operation [06/2018 - 08/2021] >> Procedure

DTC P2610-29: ECM/PCM Engine Off Timer Performance Signal Invalid; DTC P2610-93: ECM/PCM Engine Off Timer Performance No Operation [06/2018 - 08/2021]: Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Lexus ES 350, 2023 Lexus ES 350, 2022 Lexus ES 350, 2021 Lexus ES 350, and 2020 Lexus ES 350. However, it is still accessible from the selected car via links, so may be relevant.
  1. REPLACE ECM 
    1. Replace the ECM.

      Refer to REMOVAL [06/2018 - 10/2019] , or refer to REMOVAL [10/2019 - 08/2021]

      Result

      Proceed to
      NEXT

    Result: 

    NEXT 

    See step  2

  2. CLEAR DTC 
    1. Connect the Techstream to the DLC3.
    2. Turn the engine switch on (IG).
    3. Turn the Techstream on.
    4. Clear the DTC.

      Powertrain > Engine > Clear DTCs 

    5. Turn the engine switch off and wait for at least 30 seconds.

      Result

      Proceed to
      NEXT

    Result: 

    NEXT 

    See step  3

  3. CHECK WHETHER DTC OUTPUT RECURS (DTC P2610-29 OR P2610-93) 
    1. Drive the vehicle in accordance with the driving pattern described in Confirmation Driving Pattern.
    2. Enter the following menus: Powertrain / Engine / Trouble Codes / Pending.

      Powertrain > Engine > Trouble Codes 

    3. If no pending DTC is output, the repair has been successfully completed.

      Result

      Proceed to
      NEXT

    Result: 

    NEXT 

    END