DTC P0365-2A: Camshaft Position Sensor "B" Bank 1 Signal Stuck in Range; DTC P0365-31: Camshaft Position Sensor "B" Bank 1 No Signal; DTC P0390-31: Camshaft Position Sensor "B" Bank 2 No Signal [06/2018 - 08/2021]: Description

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Lexus ES 350, 2023 Lexus ES 350, 2022 Lexus ES 350, 2021 Lexus ES 350, and 2020 Lexus ES 350. However, it is still accessible from the selected car via links, so may be relevant.

Refer to DTC P0365-11.

Refer to DTC P0365-11: Camshaft Position Sensor "B" Bank 1 Circuit Short to Ground; DTC P0365-15: Camshaft Position Sensor "B" Bank 1 Circuit Short to Battery or Open; DTC P0390-11: Camshaft Position Sensor "B" Bank 2 Circuit Short to Ground; DTC P0390-15: Camshaft Position Sensor "B" Bank 2 Circuit Short to Battery or Open [06/2018 - 08/2021]

DTC No.	Detection Item	DTC Detection Condition	Trouble Area	MIL	Memory	Note
P0365-2A	Camshaft Position Sensor "B" Bank 1 Signal Stuck in Range	No VVT sensor (for exhaust camshaft of bank 1) signal to ECM while engine cranking (1 trip detection logic).	Open or short in VVT sensor (for exhaust camshaft of bank 1) circuit VVT sensor (for exhaust camshaft of bank 1) Exhaust camshaft Valve timing ECM	Comes on	DTC stored	SAE Code: P0365
P0365-31	Camshaft Position Sensor "B" Bank 1 No Signal	No VVT sensor (for exhaust camshaft of bank 1) signal for 5 seconds at an engine speed of 600 rpm or higher (1 trip detection logic).	Open or short in VVT sensor (for exhaust camshaft of bank 1) circuit VVT sensor (for exhaust camshaft of bank 1) Exhaust camshaft Valve timing ECM	Comes on	DTC stored	SAE Code: P0365
P0390-31	Camshaft Position Sensor "B" Bank 2 No Signal	No VVT sensor (for exhaust camshaft of bank 2) signal for 5 seconds at an engine speed of 600 rpm or higher (1 trip detection logic).	Open or short in VVT sensor (for exhaust camshaft of bank 2) circuit VVT sensor (for exhaust camshaft of bank 2) Exhaust camshaft Valve timing ECM	Comes on	DTC stored	SAE Code: P0390

Reference: Inspection using an oscilloscope.

Refer to DTC P0340-11: Camshaft Position Sensor "A" Bank 1 or Single Sensor Circuit Short to Ground; DTC P0340-15: Camshaft Position Sensor "A" Bank 1 or Single Sensor Circuit Short to Battery or Open; DTC P0345-11: Camshaft Position Sensor "A" Bank 2 Circuit Short to Ground; DTC P0345-15: Camshaft Position Sensor "A" Bank 2 Circuit Short to Battery or Open [06/2018 - 08/2021]