LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2020 >> ES 300h Luxury >> Repair and Diagnosis >> External Pages >> Different car >> Section 120 (Power Tilt & Power Telescopic Steering Column System (Except Hybrid) - Diagnostic Codes & Circuit Tests) >> POWER TILT AND POWER TELESCOPIC STEERING COLUMN SYSTEM (for Gasoline Model) >> DTC B2610-96: Tilt Position Sensor or Tilt Motor Circuit Component Internal Failure [06/2018 - ] >> Description

DTC B2610-96: Tilt Position Sensor or Tilt Motor Circuit Component Internal Failure [06/2018 - ]: Description

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2024 Lexus ES 350, 2024 Lexus ES 250, 2023 Lexus ES 350, 2023 Lexus ES 250, and 2022 Lexus ES 350. However, it is still accessible from the selected car via links, so may be relevant.

The tilt motor (steering column assembly) is operated by the power source voltage supplied from the multiplex tilt and telescopic ECU and tilts the steering column up and down. The tilt position sensor (Hall IC) in the tilt motor (steering column assembly) detects the tilt angle of the steering column assembly and sends a signal to the multiplex tilt and telescopic ECU based on that angle.

DTC No. Detection Item DTC Detection Condition Trouble Area
B2610-96 Tilt Position Sensor or Tilt Motor Circuit Component Internal Failure Tilt operation stops within the operation range while operating.
  • TI&TE Fuse
  • Tilt position sensor (steering column assembly)
  • Tilt motor (steering column assembly)
  • Harness or connector
  • Multiplex tilt and telescopic ECU