Removal [10/2015 - 08/2016]: Procedure

for 2WD: Refer to REMOVAL [10/2015 - 08/2016] 

for AWD: Refer to REMOVAL [10/2015 - 08/2016]

1. Remove the bolt, nut and rear upper control arm assembly LH from the rear suspension member sub-assembly.
   NOTE:

   Because the nut has its own stopper, do not turn the nut. Loosen the bolt with the nut secured.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

HINT: 

Perform the same procedure as for the LH side.