Removal [09/2015 - 08/2016]: Procedure
- REMOVE ENGINE ASSEMBLY WITH TRANSAXLE
Refer to REMOVAL [09/2015 - 08/2016]
- REMOVE CAMSHAFT TIMING OIL CONTROL SOLENOID ASSEMBLY (for Intake Side of Bank 1)
- Disconnect the camshaft timing oil control solenoid assembly connector.
- Remove the 2 bolts and camshaft timing oil control solenoid assembly from the timing chain cover assembly.NOTE:
If the camshaft timing oil control solenoid assembly has been struck or dropped, replace it.
- Remove the O-ring from the camshaft timing oil control solenoid assembly.NOTE:
- If the O-ring comes off in the timing chain cover assembly, make sure to remove it.
- Do not drop the O-ring into the timing chain cover assembly.
- Disconnect the camshaft timing oil control solenoid assembly connector.
- REMOVE CAMSHAFT TIMING OIL CONTROL SOLENOID ASSEMBLY (for Exhaust Side of Bank 1)
- Disconnect the camshaft timing oil control solenoid assembly connector.
- Remove the 2 bolts and camshaft timing oil control solenoid assembly from the timing chain cover assembly.NOTE:
If the camshaft timing oil control solenoid assembly has been struck or dropped, replace it.
- Remove the O-ring from the camshaft timing oil control solenoid assembly.NOTE:
- If the O-ring comes off in the timing chain cover assembly, make sure to remove it.
- Do not drop the O-ring into the timing chain cover assembly.
- Disconnect the camshaft timing oil control solenoid assembly connector.