LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2019 >> RX 350L FWD >> Repair and Diagnosis >> Engine Mechanical >> Lubrication System >> Engine Lubrication System - Service Information >> Oil Pan And Oil Level Sensor >> Removal [08/2019 - ] >> Procedure

Removal [08/2019 - ]: Procedure

  1. DRAIN ENGINE OIL 

    See step  1 [09/2015 - 07/2021], or see step  1 [07/2021 - ]

  2. REMOVE FRONT FRAME ASSEMBLY 

    Refer to REMOVAL [08/2019 - ]

  3. REMOVE NO. 2 OIL PAN SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 32

  4. REMOVE OIL STRAINER SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 33

  5. REMOVE ENGINE OIL LEVEL SENSOR 
    1. Disconnect the engine oil level sensor connector.
    2. Remove the clip from the engine oil level sensor.
      GTY666622Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. Remove the 2 bolts and engine oil level sensor.
      GTY684444Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals