Removal [09/2015 - ]: Procedure

REMOVE WASHER NOZZLE SUB-ASSEMBLY

Using a screwdriver, disengage the 2 claws as indicated by the arrows, in the order shown in the illustration to separate the washer nozzle sub-assembly.

Fig 1: Washer Nozzle Sub-Assembly Loosening Sequence

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

*a	Protective Tape
	Remove in this Direction (1)
	Remove in this Direction (2)

NOTE:

Be careful not to damage the windshield glass.

HINT:

Tape the screwdriver tip before use.

Disconnect the washer hose to remove the washer nozzle sub-assembly.

NOTE:

Washer nozzle sub-assemblies cannot be reused.