Components [08/2019 - ]

Fig 1: Rear Bumper (W/O Rear No. 2 Seat) Replacement Components (1 Of 6)

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

*1	QUARTER OUTSIDE MOULDING SUB-ASSEMBLY LH	*2	QUARTER OUTSIDE MOULDING SUB-ASSEMBLY RH
*3	REAR BUMPER ASSEMBLY	*4	REAR LIGHT COVER LH
*5	REAR LIGHT COVER RH	-	-

Fig 2: Rear Bumper (W/O Rear No. 2 Seat) Replacement Components (2 Of 6)

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

*A	for TMC Made	*B	for TMMC Made
*C	w/ Intuitive Parking Assist System	*D	w/o Intuitive Parking Assist System
*E	w/ Kick Sensor	*F	w/o Kick Sensor
*G	except F-Sport	*H	for F-Sport
*1	KICK DOOR CONTROL SENSOR WITH BRACKET	*2	NO. 3 LUGGAGE ROOM WIRE
*3	REAR CENTER ULTRASONIC SENSOR	*4	REAR CENTER ULTRASONIC SENSOR RETAINER
*5	REAR CORNER ULTRASONIC SENSOR	*6	REAR CORNER ULTRASONIC SENSOR RETAINER
*7	ULTRASONIC SENSOR CLIP	-	-
•	Non-reusable part	-	-

Fig 3: Rear Bumper (W/O Rear No. 2 Seat) Replacement Components (3 Of 6)

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

*1	NO. 1 MOULDING TAPE	*2	REAR BUMPER EXTENSION SUB-ASSEMBLY LH
*3	REAR BUMPER EXTENSION SUB-ASSEMBLY RH	*4	REFLEX REFLECTOR ASSEMBLY LH
*5	REFLEX REFLECTOR ASSEMBLY RH	*6	GROMMET
•	Non-reusable part	-	-

Fig 4: Rear Bumper (W/O Rear No. 2 Seat) Replacement Components (4 Of 6)

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

*A	for TMMC Made with Kick Sensor	*B	except TMMC Made with Kick Sensor
*C	except F-Sport	*D	for F-Sport
*1	CENTER REAR BUMPER EXTENSION SUB-ASSEMBLY	*2	KICK DOOR CONTROL SENSOR WITH BRACKET
*3	REAR BUMPER EXTENSION RETAINER LH	*4	REAR BUMPER EXTENSION RETAINER RH

Fig 5: Rear Bumper (W/O Rear No. 2 Seat) Replacement Components With Torque Specifications (5 Of 6)

Callout	Description	Callout	Description
*A	w/o Towing Hitch	-	-
*1	LOWER REAR BUMPER RETAINER LH	*2	LOWER REAR BUMPER RETAINER RH
*3	NO. 1 REAR BUMPER REINFORCEMENT	*4	REAR BUMPER ENERGY ABSORBER
*5	REAR BUMPER SIDE RETAINER LH	*6	REAR BUMPER SIDE RETAINER RH
*7	REAR WHEEL HOUSE LINER LH	*8	REAR WHEEL HOUSE LINER RH
*9	UPPER REAR BUMPER RETAINER LH	*10	UPPER REAR BUMPER RETAINER RH
*11	GROMMET	-	-
	Nm (kgfcm, ft.*lbf): Specified torque	-	-

Fig 6: Rear Bumper (W/O Rear No. 2 Seat) Replacement Components With Torque Specifications (6 Of 6)

Callout	Description	Callout	Description
*A	w/ Towing Hitch	-	-
*1	RECEIVER HITCH BRACKET LH	*2	RECEIVER HITCH BRACKET RH
*3	RECEIVER HITCH BRACKET SUB-ASSEMBLY	*4	TOWING SOCKET
	Nm (kgfcm, ft.*lbf): Specified torque	-	-