LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2019 >> RX 350L FWD >> Repair and Diagnosis >> Accessories & Equipment >> Infotainment >> Cellular Communication System - Service Information >> Back-Up Battery >> Removal [09/2015 - 12/2017] >> Procedure

Removal [09/2015 - 12/2017]: Procedure

  1. REMOVE REMOTE TOUCH ASSEMBLY 

    Refer to PROCEDURE - Step 1

  2. REMOVE LOWER NO. 2 INSTRUMENT PANEL FINISH PANEL 

    Refer to PROCEDURE - Step 2

  3. REMOVE LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL 

    Refer to PROCEDURE - Step 3

  4. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 4

  5. REMOVE INSTRUMENT CLUSTER FINISH PANEL ORNAMENT 

    Refer to PROCEDURE - Step 5

  6. REMOVE CONSOLE PANEL SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 6

  7. REMOVE BACK-UP BATTERY WITH BRACKET 
    1. Disconnect the connector.
      GTY669210Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Disengage the clamp.
    3. Remove the 2 nuts and back-up battery with bracket.
      GTY669209Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  8. REMOVE NO. 1 TELEPHONE BRACKET 
    1. Remove the nut.
      GTY646295Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Remove in this Direction (1)
      Remove in this Direction (2)
    2. Disengage the 2 guides to remove the No. 1 telephone bracket as shown in the illustration.
  9. REMOVE NO. 2 TELEPHONE BRACKET 
    1. Remove the No. 2 telephone bracket as shown in the illustration.
      GTY668260Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Remove in this Direction
  10. REMOVE BACK-UP BATTERY 
scientia non olet · About LEMON Manuals