LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2019 >> NX 300h >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Meter / Gauge / Display System (Service Information) >> Light Control Rheostat >> Removal [10/2014 - ] >> Procedure

Removal [10/2014 - ]: Procedure

  1. REMOVE INSTRUMENT SIDE PANEL LH 

    Refer to PROCEDURE - Step 12 [10/2014 - 09/2017], or refer to PROCEDURE - Step 12 [09/2017 - 05/2019], or refer to PROCEDURE - Step 12 [05/2019 - ]

  2. REMOVE NO. 1 INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 13 [10/2014 - 09/2017], or refer to PROCEDURE - Step 13 [09/2017 - 05/2019], or refer to PROCEDURE - Step 13 [05/2019 - ]

  3. REMOVE TRIP SWITCH (LIGHT CONTROL RHEOSTAT) 
    1. Using a screwdriver, detach the 2 claws and remove the trip switch (light control rheostat).

      HINT: 

      Tape the screwdriver tip before use.

      GTY499407Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *1 Protective Tape
scientia non olet · About LEMON Manuals