Suspension Control ECU Communication Stop Mode [07/2020 - ]: Description

Detection Item	Symptom	Trouble Area
Suspension Control ECU Communication Stop Mode	Any of the following conditions are met: Communication stop for "Suspension Control (Air Suspension)" is indicated on the "Communication Bus Check" screen of the Techstream. Refer to DIAGNOSIS SYSTEM [07/2020 - ] Communication system DTCs (DTCs that start with U) that correspond to "Suspension Control ECU Communication Stop Mode" in "DTC Combination Table" are output. Refer to DTC COMBINATION TABLE [07/2020 - ]	Absorber control ECU branch wire or connector Power source circuit of absorber control ECU Absorber control ECU ground circuit Absorber control ECU