Skid Control ECU Communication Stop Mode [05/2019 - ]: Description

Detection Item	Symptom	Trouble Area
Skid Control ECU Communication Stop Mode	Any of the following conditions are met: Communication stop for "Skid Control (ABS/VSC/TRAC)" is indicated on "Communication Bus Check". Refer to DIAGNOSIS SYSTEM [05/2019 - 10/2019] , or refer to DIAGNOSIS SYSTEM [10/2019 - 07/2020] , or refer to DIAGNOSIS SYSTEM [07/2020 - ] Communication system DTCs (DTCs that start with U) that are output correspond to "Skid Control ECU Communication Stop Mode" in "DTC Combination Table". Refer to DTC COMBINATION TABLE [05/2019 - 10/2019] , or refer to DTC COMBINATION TABLE [10/2019 - 07/2020] , or refer to DTC COMBINATION TABLE [07/2020 - ]	Brake booster with master cylinder assembly (skid control ECU) CAN branch wire or connector Power source circuit of brake booster with master cylinder assembly (skid control ECU) Brake booster with master cylinder assembly (skid control ECU) ground circuit Brake booster with master cylinder assembly (skid control ECU)