Combination Meter ECU Communication Stop Mode [05/2019 - ]: Description

Detection Item	Symptom	Trouble Area
Combination Meter ECU Communication Stop Mode	Any of the following conditions are met: Communication stop for "Combination Meter" is indicated on the "Communication Bus Check" screen of the Techstream. Refer to DIAGNOSIS SYSTEM [05/2019 - 10/2019] , or refer to DIAGNOSIS SYSTEM [10/2019 - 07/2020] , or refer to DIAGNOSIS SYSTEM [07/2020 - ] Communication system DTCs (DTCs that start with U) that correspond to "Combination Meter ECU Communication Stop Mode" in "DTC Combination Table" are output. Refer to DTC COMBINATION TABLE [05/2019 - 10/2019] , or refer to DTC COMBINATION TABLE [10/2019 - 07/2020] , or refer to DTC COMBINATION TABLE [07/2020 - ]	Combination meter assembly main wire or connector Power source circuit of combination meter assembly Combination meter assembly ground circuit Combination meter assembly